Understanding 1,2,3-TCP in Cleveland County Water: Treatment Equipment Choices for Households
$1,450.00
Whole House 1,2,3-TCP Reduction Water Filter System - Trichloropropane Removal
✓ Free shipping in the USA · ✓ 90-day returns · ✓ Secure checkout
How a Soil Fumigant Impurity from the 1950s-1980s Reached Deep Groundwater Decades Later
1,2,3-Trichloropropane (TCP) originated as an impurity in soil fumigants used primarily between the 1950s and 1980s. Over time, this chlorinated solvent leached through soil and percolated into deep groundwater. Its persistence means that even decades later, TCP can still be present in water sources that draw from these underground reserves. This historical use explains why modern monitoring still detects traces of TCP in some water systems.
How Sample Depth, Well Depth or Source Type Changes What a Reader Should Expect
Water quality measurements for TCP depend heavily on the water source and sampling protocols. The Moore public water system in Cleveland County, serving over 55,000 people with surface water, reported no detections of TCP above the 0.03 micrograms per liter (parts per billion) reporting level in federal monitoring from 2013 to 2015. This indicates that in surface water sources, TCP levels are below detection thresholds or absent in measurable amounts. However, private wells drawing from deeper groundwater layers may have different TCP concentrations, so homeowners relying on well water should test their specific water supply to understand their exposure.
The Order in Which to Rule Things Out, from Cheapest Check to Laboratory Test
To clarify whether TCP is a concern in your household water, start with simple steps before proceeding to detailed lab tests. Check with your local water utility for annual water quality reports that include TCP monitoring results. This provides a system-wide context for typical TCP presence in the municipal supply. If you use a private well or want a more precise personal water picture, obtain a certified laboratory test targeting 1,2,3-trichloropropane. These tests confirm the presence and concentration of TCP specific to your household water and are key to informed decision making.
What a Certified Laboratory Test for This Constituent Reports and How to Read It
Laboratory results for 1,2,3-TCP typically report concentrations in micrograms per liter (µg/L), which correspond to parts per billion (ppb). The detection threshold commonly used is 0.03 µg/L. Any reported value below this threshold indicates TCP was not detected at a measurable level in your sample, while values above this mark show TCP presence to some extent. Since no federal maximum contaminant level (MCL) currently exists for TCP, any detection is a measurement, not a violation or an indicator of unsafe water. This data supports decisions about whether treatment equipment is advisable.
Granular Activated Carbon Contact Time: Why Bed Depth Matters More for TCP Than for Taste
When considering treatment options for 1,2,3-trichloropropane, the effectiveness of granular activated carbon depends largely on contact time, which is influenced by the depth of the carbon bed. Longer contact allows better adsorption of TCP molecules, which resist removal by simpler methods like air stripping. This contrasts with treatment focused on taste or odor where superficial carbon layers may suffice. For households deciding between equipment classes, selecting a system with an adequately deep carbon bed ensures improved performance tackling TCP specifically.
In summary, TCP in Cleveland County water stems from historical fumigant use and appears mainly in groundwater rather than surface water supplies. Homeowners should verify their own water through certified lab testing following local reports. Treatment choices hinge on properly matching equipment characteristics—like carbon bed depth—to the challenge posed by TCP. The Pentair 1,2,3-TCP Filter ships ready to configure and offers a documented approach for households prioritizing this concern.
Where this information comes from
Source: EPA SDWIS public water system record. Sampled 2015-12-07. These figures describe the public water system's record, not the plumbing inside any individual building.
On record: EPA UCMR3 monitoring (2013-2015) for Moore (OK2001412), OK: 43 results across 1 listed contaminants, 0 detections above the reporting level; nothing detected above the method reporting level