Fleck Timer Assy, 3200/3214 Rigt Hing

The Fleck Timer Assembly for 3200/3214 valves, right-hinge configuration (FL42466-11), is a complete NXT-series timer module that controls regeneration on these Fleck valves. As the electronic brain of the control head, the NXT timer manages the cycle schedule, monitors flow when the valve is metered, and signals the drive to step the valve through service and regeneration. When it is healthy, the whole valve runs predictably; when it fails, even a mechanically perfect valve sits idle.

This right-hinge version is built to mount and open correctly for a specific control-head orientation, so matching the hinge direction to your existing assembly ensures proper fit, clearance, and access for wiring and service. It is a genuine Pentair Fleck NXT timer component.

• Complete NXT-series timer assembly for Fleck 3200/3214 valves
• Right-hinge configuration for correct mounting and access
• Manages regeneration scheduling and drive control
• Genuine Pentair Fleck replacement module, about 0.64 lbs
• Restores full programmability to the control head
• Supports both metered and time-clock operation as configured

When a timer needs replacing

The NXT timer is a sophisticated electronic assembly, and when it fails the symptoms can include a blank or frozen display, lost programming that won't hold, a valve that won't initiate regeneration, or erratic cycling that has no obvious pattern. Because it coordinates the entire regeneration process, a faulty timer effectively disables the softener or filter even when the mechanical drive, piston, and seals are all sound.

Before replacing, confirm power is reaching the unit and rule out a failed transformer, a loose connector, or a wiring fault, since these can imitate a dead timer and lead to an unnecessary swap. Once you have confirmed the timer itself is the problem, the replacement is straightforward.

When installing the new right-hinge assembly, mount it squarely so it seats and closes properly, connect the drive and meter leads carefully in their correct positions, and then reprogram the regeneration settings to match your water hardness and household or facility usage. Always disconnect power before swapping the timer module, and double-check the programming once power is restored so the valve regenerates exactly as intended. Stocking a spare NXT timer matched to your hinge orientation lets you restore a down valve quickly, since the electronic control is the one component that can idle an otherwise perfectly sound mechanical valve.